Outrigger Pole

Material: carbon fiber  
Product composition: carbon rod + metal accessories. (We provide a complete set of products)
Fishing target: dolphin, marlin, swordfish and other large fish.

Outrigger pole are mounted on either side of the fishing boat, with lengths ranging from 15 to 35 feet. These poles are connected to the cabin or deck via special bases to suit a variety of boat types and preferences.

Outrigger pole are mainly used in deep-sea trolling.They are a pair of long rods that are installed on both sides of the boat to keep the fishing line away from the boat. The material is usually carbon fiber and is tilted at an angle between 70 and 80 degrees.

Outrigger pole can widen the trolling area and accommodate multiple fishing lines, so that the bait is spread behind the boat, so more bait is spread in the water, which will attract more fish. In addition, spearguns can raise the line so that the bait can run on the water, which is even more important on smaller ships.

CUSTOMIZED SIZE ACCEPTABLE

Precautions in use:

• High speed cruising in rough seas is not recommended.
• High speed cruising with the outriggers fully extended can cause possible damage to the outrigger sections and internal components of the Carbon Fiber construction.
• Retract your outriggers before operating under those conditions.
• Excessive release clip tension or faulty clips can cause unnecessary loads on outriggers and mounts. Adjust and check clips before each use.
• Do not dent any of the tubes.
• Carbon Fiber Poles are good conductors of electricity. Avoid use of the poles during lightning storms as a safety measure.